顶部联系方式

Time of issue:2019-09-22 00:00:00

phone  +86 18290431441email  hebe@cnvbolt.com

SEARCH
Confirm
Cancel

VBOLT

CASE

VBOLT

CASE

/
/
What kind of oil to choose what kind of oil filter
Check category

What kind of oil to choose what kind of oil filter

  • Categories:Tech
  • Author:SunnyLuo
  • Origin:Chongqing Vbolt
  • Time of issue:2020-09-25 10:28
  • Views:935

(Summary description)What kind of oil to choose what kind of oil filter

What kind of oil to choose what kind of oil filter

(Summary description)What kind of oil to choose what kind of oil filter

  • Categories:Tech
  • Author:SunnyLuo
  • Origin:Chongqing Vbolt
  • Time of issue:2020-09-25 10:28
  • Views:935
Information

What kind of oil to choose what kind of oil filter

 The reasons why the hydraulic oil still does not meet the standard after being filtered by the vacuum oil filter are as follows:
1. The oil has high water content.
2. The oil is not heated enough.
3. The filter screen of the vacuum oil filter is damaged.
4. The vacuum oil filter equipment is reused without cleaning.
5. The vacuum of the oil filter is too low.
The solution to the hydraulic oil filter failure:
1. If the water content is too high, a coalescing oil filter can be used to pre-filter, after removing the large water, it will remove impurities and small molecule water;
2. The reason for the insufficient heating temperature of the oil is that the vacuum oil filter manufacturer did not conduct experiments on the viscosity of the medium during the design, resulting in low power and insufficient treatment effects; Chongqing Vbolt has conducted research and development experiments to target hydraulic oil, Research and development of new heaters for transformer oil, lubricating oil and other oils with different viscosity and pollution degrees, which will not dry burning or heating oil temperature is not enough.
3. If the filter of the vacuum oil filter is damaged, it is recommended to replace the filter, and the filter specifications of each manufacturer are different. It is also recommended to directly contact the manufacturer of the Chongqing oil filter.
purchase;
4. After the oil filter has filtered the oil once, it needs to drain the internal oil, otherwise the oil in the equipment will be easily polluted by moisture and impurities in the air.
It is easy to cause the other oil products to be contaminated when used. It is recommended to replace the filter element and clean the oil filter when using other oil filters;
5. What the vacuum oil filter needs is to purify in a vacuum state. If the vacuum is not enough, the manufacturer's equipment must be unqualified. Replace the equipment or repair it!

http://cnvbolt.com

Keyword:

Scan the QR code to read on your phone

CONTACT

We’d love to hear about your project.

EMAIL

hebe@cnvbolt.com

ADDRESS

Success Industrial Zone, Hechuan District, Chongqing, China

留言应用名称:
Customer message
Description:
验证码

地址版权

Time of issue:2019-09-22 00:00:00
© 2019 重庆威博尔特机械制造有限公司版权所有 Powered by: www.300.cn 渝ICP备19012719号

手机版地址版权

Time of issue:2019-09-22 00:00:00

© 2019 Chongqing Vbolt Machinery Manufacturing Co., Ltd.

Powered by: www.300.cn 渝ICP备19012719号