What is the principle of oil purification system
The oil filter is mainly composed of heating system; filter system, vacuum separation system; oil pump system. control system of the whole machine, let's talk about the filter system in the oil filter:
The filtration system is a device that removes a small amount of solid particles in the liquid. When the fluid enters the filter cartridge with a certain filter screen, its impurities are blocked, and the clean filtrate is filtered out of the filter, which is indispensable in the purification process of the fluid Disposal methods are mainly used to remove particles or other suspended solids in the fluid. In Chongqing Vbolt's oil filter (http://www.cnvbolt.com), the filter system is equipped with an overpressure alarm and shutdown device (measuring the degree of pollution of the filter element) to ensure that the filter will not be damaged by overpressure and reduce Use cost to ensure the safety of the filter system and remind the operator that it is time to clean the filter.
The performance of the strong magnetic filter can filter out the iron filings, iron foam and other metal particles produced by the normal wear of the oil in the operation of the equipment.
Coarse filter and semi-fine filter filter (stainless steel), step-by-step encryption technology can block fine impurities, hold a large amount of dirt, and can be repeatedly cleaned and used.
Coalescence filter element (single-stage vacuum oil filter coalescence filter element and a set of separate filter elements, the coalescence filter element adopts a unique polar molecular structure, the free water and emulsified water in the oil are coalesced after passing through the filter element Into larger water droplets, and then rely on gravity to sink into the water storage tank.
Separation filter element: The separation filter element of the separation system is made of a special hydrophobic material. When the oil passes through the filter element, the water drops are blocked on the outer surface of the filter element and coalesce with each other until it settles into the water storage tank due to gravity. The separated water is stored in the water storage tank. When the interface height reaches the set value, the valve is opened to drain the water.
The precision filter element uses wood fiber filter element and PH glass fiber cotton filter element. The precision filter element mainly uses wood fiber as raw material. This material is polar due to the large amount of oxygen atoms. The degradation products of oil are also polar. When the degradation product passes through the wood fiber with a polar position, the degradation product will be attracted and trapped. This is because wood fiber has a large active surface, that is, a large amount of magnetic field area, so it is very effective for the absorption and adsorption of pollutants.