顶部联系方式

Time of issue:2019-09-22 00:00:00

phone  +86 18290431441email  hebe@cnvbolt.com

SEARCH
Confirm
Cancel

VBOLT

NEWS

VBOLT

NEWS

/
/
VBOLT Meet the most advanced oil treatment and purification plant
Check category

VBOLT Meet the most advanced oil treatment and purification plant

  • Categories:News
  • Author:Sunny
  • Origin:Chongqing Vbolt
  • Time of issue:2020-04-21 15:07
  • Views:987

【Summary】Transformer oil regeneration module Vbolt enables complete renewal of used and old transformer oil onsite fulfilling the requirement of IEC 60422 standard as well as corrosive sulfur removal. Vbolt

VBOLT Meet the most advanced oil treatment and purification plant

【Summary】Transformer oil regeneration module Vbolt enables complete renewal of used and old transformer oil onsite fulfilling the requirement of IEC 60422 standard as well as corrosive sulfur removal. Vbolt

  • Categories:News
  • Author:Sunny
  • Origin:Chongqing Vbolt
  • Time of issue:2020-04-21 15:07
  • Views:987
Information

Transformer oil regeneration module  Vbolt enables complete renewal of used and old transformer oil onsite fulfilling the requirement of IEC 60422 standard as well as corrosive sulfur removal.  Vbolt equipment is designed as an add on module to work together with our transformer oil treatment  Vbolt  plants. Its function is to extend the capabilities of our exiting  Vbolt line enabling the  Vbolt plants to fully regenerate used transformer oil.

Unique reactivation technology
Automated operation on online and offline transformers
Automatic removal of corrosive sulfur from transformer oils
Works on all types of mineral transformer oils

Transformer oil filter is mainly divided into ordinary vacuum oil filter and two-stage high-efficiency vacuum oil filter.
Transformer oil filter can quickly remove the harmful components in the oil, such as water, gas and impurities in the transformer oil, improve the lubricating performance of the transformer oil, and reduce the rust or corrosion of the oil equipment due to the excessive moisture or impurity content in the transformer oil , To extend the service life of oil equipment.

 

Description of oil regeneration process

Most power equipment is using transformer oil for its dielectric properties for cooling, insulating, and protecting the active parts. Transformer oils are highly refined oils that consist mainly of a mixture of hydrocarbons. Over time, oxidation by products start to form in the oil. Increases in oxidation by products result in the increase of acidity (neutralization number) and decrease the interfacial tension of the oil. At this stage, sludge starts to form, and oil is losing its dielectric properties because it is getting old. To prevent further deterioration of oil and possible damage to the active part of the transformer, oil needs to be regenerated. Oil regeneration equipment regenerates oil in steps.

At the inlet of the equipment, oil is filtered through a coarse filter to prevent any particles from entering the equipment. It is then heated to the desired temperature to elevate the regeneration effect. After the oil has been heated, it enters the back section of the equipment. Oil is pumped through the back section which houses columns with sorbent media. It is in this section where the oil is stripped of impurities and ageing by products.

Oil is then pumped through a vacuum breaking valve into the degassing section where it is dehydrated and degassed. Treated oil is then pumped back to the transformer by the outlet pump. After a given period, sorbent in the back section of the equipment achieves full saturation and is no longer able to regenerate oil. At this stage, the sorbent needs to be reactivated (restored to its original state) to be able to regenerate oil again. Reactivation stage starts by draining the columns in the back section of saturated oil. After the oil has been drained, a vacuum is created and maintained throughout the whole reactivation process in the back section. Then by selective use of heating elements on the top parts of individual columns, the reactivation process is initiated. During the process, the impurities are removed from the sorbent which restores it to its original state. This entire process can be repeated many times until the sorbent starts to lose its properties and needs to be replaced.

Technical characteristics of oil regeneration equipment

Oil regeneration equipment is sophisticated. Its inlet pump is a positive displacement rotary pump. The outlet pump is a centrifugal closed coupled high suction pump. For degassing the rotary vane, a vacuum pump and vacuum booster roots pump are used. For the reactivation phase, a rotary piston roots pump is used. All valves across the equipment are automatic ball valves, which are pneumatically controlled. Equipment is fully automatic, controlled by PLC logic   Numerous safety features are introduced throughout the unit to ensure the safety of the equipment as well as the operating personal. Aeration valves, overheating protection, and automatic level switches guarantee the safety of the equipment as well as its ability to identify a possible risk and to power down to prevent any accidents.

Performance values of oil regeneration equipment

The level of contamination differs from transformer to transformer. The ageing process, as well as the utilization of a transformer, make it difficult to determine when and how will oil age to the point that it loses its dielectric properties. Regardless of the level of contamination, oil regeneration always delivers the result required by the IEC 60422 standard for mineral insulating oils in electrical equipment. However, our Vbolt regeneration technology goes one step further and significantly improves on the values required by the IEC 60422 standard, with the returning oil having properties almost identical to those put into the transformer for the first time.

 Transformer oil filter is a mechanical device that filters solid impurities and moisture in oil, improves oil quality and improves the dielectric strength of transformer oil. It is used in power plants, power stations, power companies, metallurgy, petrochemicals, railways, and other industrial and mining enterprises to purify and process unqualified electrical insulating oil. It can also be used for vacuum injection of insulated power equipment and vacuum drying of electrical equipment moisture.

 

Keyword:

Scan the QR code to read on your phone

CONTACT

We’d love to hear about your project.

EMAIL

hebe@cnvbolt.com

ADDRESS

Success Industrial Zone, Hechuan District, Chongqing, China

留言应用名称:
Customer message
Description:
验证码

地址版权

Time of issue:2019-09-22 00:00:00
© 2019 重庆威博尔特机械制造有限公司版权所有 Powered by: www.300.cn 渝ICP备19012719号

手机版地址版权

Time of issue:2019-09-22 00:00:00

© 2019 Chongqing Vbolt Machinery Manufacturing Co., Ltd.

Powered by: www.300.cn 渝ICP备19012719号